HP Cluster Management Utility CMU Installation Guide with Serviceguard Version 4.0 (May 2009)

12
port = 113
disable = no
}
Restart inetd:
# /etc/init.d/xinetd restart
# ps ax |grep ident
714 pts/1 S+ 0:00 grep ident
31241 ? Ssl 0:00 identd
Mount the serviceguard iso file and cd to the mount directory:
# mount -o loop REPOSITORY/SGLX_11_18_x86.iso /mnt
# cd /mnt
Then change directory to the appropriate subdirectory, according to your distribution, and
look for the rpm to install:
tog-pegasus
# rpm -ivh Serviceguard/x86_64/tog-pegasus-2.5.3-1.sles10.x86_64.rpm
Preparing...
########################################### [100%]
1:tog-pegasus ########################################### [100%]
WARNING! The RedHat5/Serviceguard/x86_64 does not include the tog-pegasus rpm. Use rather
the tog-pegasus rpm included in the Redhat distribution.
serviceguard
# rpm -ivh serviceguard-A.11.18.00-0.sles10.x86_64.rpm
Preparing...
########################################### [100%]
1:serviceguard
########################################### [100%]
Validating the identd configuration...
Replacing the current kernel:buffers parameter with 4096 in the
/etc/identd.conf file.
Replacing the current server:backlog parameter with 4096 in the
/etc/identd.conf file.
Unable to run: /etc/rc.d/identd restart
Building modules, stage 2.
MODPOST
INSTALL /opt/cmcluster/drivers/deadman.ko
DEPMOD 2.6.16.46-0.12-smp
/bin/mknod: `/dev/deadman': File exists
The Serviceguard deadman driver has been built and
installed for kernel version 2.6.16.46-0.12-smp. If you change and
rebuild
the kernel you must also rebuild the deadman driver. This is
because the kernel version and the drivers kernel mod will not
match and thus will not load. See the file
/opt/cmcluster/bin/../drivers/README and the Serviceguard
documentation on how to do this.
No lingering cmclconfd processes to kill.
insserv: can not stat(cmsnmpd)
To complete the SG/Linux installation:
- add "/opt/cmcluster/bin" to your path
cmsnmpd
# rpm -ivh Serviceguard/x86_64/cmsnmpd-A.01.00-0.rhel5.x86_64.rpm