HP Insight Cluster Management Utility v7.1 User Guide

Figure 51 pdsh window
You can toggle the two filters on and off using dshbak or cmudiff. These two filters are mutually
exclusive, so you can:
• Filter with cmudiff
• Filter with dshbak
• Use no filter
6.12.1 cmudiff examples
Example 1 date command
The cmudiff output is two fields separated by dotted lines. The header displays:
• The number of responses, 4 in this example (This amount means a response has been received
from 4 compute nodes.)
• The reference node (This is the node chosen by cmudiff as a reference. Differences in output
from this reference node are highlighted.)
• The number of ignored lines
• The number of output lines
The output line appears below the header. In this example, the output is only 1 line:
• The “m”, which appears on the left, indicates that the output from some compute node differs
from the reference node.
6.12 Single window pdsh 95