HP Insight Control for Linux 6.0 Installation Guide

Figure 6-2 Systems Insight Manager First Time Wizard Introduction Screen
Table 6-1 Responses to the First Time Wizard
User response
Required, not
required, or
optionalFirst Time Wizard screen
Click Next.
RequiredIntroduction
At a minimum, select Linux if it is not already preselected
for you. You can make other selections as well. GlancePlus
is a performance management tool that is not used by Insight
Control for Linux, and you are not required to select it.
Click Next.
RequiredManaged Environment
Because you will run the Systems Insight Manager discovery
process manually, you will use the instructions in the HP
Insight Control for Linux User Guide at the appropriate time.
Thus, on this screen, do the following:
1. Unselect the box next to Run discovery once after
wizard finish.
2. Unselect the box next to Schedule.
3. Do not remove the default IP address range in the ping
inclusion range box.
If you accidentally remove the default IP address in the
ping inclusion box or if it is empty, enter the starting and
ending IP address range of the CMS subnet.
4. Click Next.
A pop up window appears informing you that the wizard
is skipping directly to the Privilege Elevation screen.
RequiredDiscovery
52 Logging in and configuring Systems Insight Manager