HP Insight Control for Linux 6.0 Installation Guide

7 Next steps
When Systems Insight Manager and Insight Control for Linux are fully installed on the CMS,
use the instructions in the HP Insight Control for Linux User Guide to perform the following tasks:
1. Discover your managed systems, switches, and enclosures to make them known to Systems
Insight Manager and Insight Control for Linux.
2. Register and copy software into the Insight Control for Linux repository (such as Linux OSs,
firmware updates, PSPs, Kickstart and AutoYaST installation configuration files) to make
them available for deployment to managed systems
3. Use Insight Control for Linux tools to install a supported Linux OS on your managed systems,
if required.
4. Set up your managed systems according to Insight Control for Linux requirements, including
applying a license to each managed system.
5. Configure Insight Control for Linux management services.
These tasks are documented in the HP Insight Control for Linux User Guide because they are tasks
that can be performed at any time, not just for initial configuration.
57