HP Insight Control for Linux 6.0 Installation Guide

Figure A-8 Microsoft DHCP graphical utility: Scope options dialog box (2)
Your Microsoft DHCP server is now configured to provide the options required for Insight
Control for Linux.
A.3 Configuring a static IP Address using DNSMASQ
Example A-2 demonstrates how to configure two hosts with static IP addresses. You must assign
IP addresses that are outside of the pool of addresses configured in the range option.
Example A-2 Sample DNSMASQ configuration file with static IP addresses
interface=eth0
domain-needed
bogus-priv
filterwin2k
domain=example.com
expand-hosts
dhcp-lease-max=20000
# pXe Boot Configuration
dhcp-boot=/pxelinux.bin,boothost,172.1.1.1
# System Imager DHCP Option--IP Address of the CMS
dhcp-option=140,"172.1.1.1"
# Turn on logging
log-queries
dhcp-range=172.1.1.100,172.1.1.200,255.255.255.0,24h
A.3 Configuring a static IP Address using DNSMASQ 81