HP Insight Control for Linux 6.0 User Guide

23.11 Troubleshooting large scale deployment problems
The following table provides the actions to correct a large scale deployment failure.
Corrective ActionsCause/Symptom
Perform the appropriate action:
• Examine the log in Operation Details section of the
Task Results window for errors or other information.
For example when the image is being transferred
during the Wait For Imaging To Complete
operation, the exact command used to download the
image is shown along with progress information.
Perform the steps to correct that specific problem.
• Ensure that your network groups were created
correctly. Verify them with the following command:
/opt/hptc/bin/netgroup --leaders 1
The output will appear on the screen in the following
format:
group_name = list of systems
The first managed system listed in each group is the
group leader.
• Examine the environment variables that begin with
LSD_ in the /opt/mx/icle/icle.properties file.
Determine which of these variables are being used and
if their values are appropriate.
Large Scale Deployment Failed
23.12 Troubleshooting licensing problems
The following table describes possible causes of problems that might be encountered with
licensing a managed system and provides actions to correct them.
Corrective actionsCause/Symptom
Use the HP SIM Deploy→License Manager tool to assign
Insight Control for Linux licenses to the target system.
Target Node Shows “Not Licensed” In Tool Wizard
Specific Insight Control for Linux tools require that an
Insight Control for Linux license be assigned to the target
managed system.
This is the default behavior. There is no corrective action.Licensing Page Is Always Displayed When Running a
Tool
The default behavior of the deployment tools is to display
the License Target System Window.
Use the HP SIM Deploy→License Manager tool to assign
Insight Control for Linux licenses to the target system.
Target Node Is Not Licensed For This Tool
The tool requires that an Insight Control for Linux license
be assigned to the target system.
Follow the procedure in “Restoring Operation After a
Firmware Upgrade” (page 209)
License problems after DL1xx series firmware update
After a DL1xx series server firmware update, SIM might
disassociate a server and its management processor as
well as their license.
23.11 Troubleshooting large scale deployment problems 231