HP Insight Control for Linux 7.0 Installation Guide

Figure 14 Microsoft DHCP graphical utility: Scope options dialog box (2)
Your Microsoft DHCP server is now configured to provide the options required for Insight
Control for Linux.
A.3 Configuring a static IP Address using DNSMASQ
Example 11 demonstrates how to configure two hosts with static IP addresses. You must assign IP
addresses that are outside of the pool of addresses configured in the range option.
Example 11 Sample DNSMASQ configuration file with static IP addresses
interface=eth0
domain-needed
bogus-priv
filterwin2k
domain=example.com
expand-hosts
dhcp-lease-max=20000
# pXe Boot Configuration
dhcp-boot=/pxelinux.bin,boothost,172.1.1.1
# System Imager DHCP Option--IP Address of the CMS
dhcp-option=140,"172.1.1.1"
# Turn on logging
log-queries
dhcp-range=172.1.1.100,172.1.1.200,255.255.255.0,24h
A.3 Configuring a static IP Address using DNSMASQ 77