HP Insight Control for Linux 6.0 User Guide

1.16 Backing up HP Insight Control for Linux files
The following table contains a list of user files and directories that must be backed up in order
to regenerate your customized installation, if needed.
Table 1-3 HP Insight Control for Linux files and directories to back up
ReasonFiles and directories to back up
Supported and custom operating systems, boot
images, captured images, installation
configuration scripts, dependency scripts, and
the Firmware Update file are located in this
directory.
/opt/repository/*
This file contains the configuration data for the
Console Management Facility.
/opt/hptc/cmf/cmf.conf
This file contains Insight Control for Linux
configuration values.
/opt/mx/icle/icle.properties
This is the database for the network
configuration parameters.
/opt/mx/icle/config/network_map.xml
This directory holds critical information used
by Nagios.
/opt/hptc/nagios/etc/templates/*
This file contains the configuration data for the
syslog-ng utility.
/opt/hptc/syslog-ng/etc/syslog-ng/syslog-ng.conf
Required only if the CMS is also a DHCP server.
/etc/dhcpd.conf
Static table for host names.
/etc/hosts
Configuration file for the Net-SNMP SNMP
agent.
/etc/snmp/snmpd.conf
You will also need to back up HP SIM configuration files to restore your configuration. For more
information on these HP SIM configuration files, see the following white paper:
Backing up and restoring HP SIM 5.2 or greater data files in an HP-UX and Linux environment
24 Using HP Insight Control for Linux