Setting up Managed Systems in ICE-Linux without the ProLiant Service Pack

6
.1.3.6.1.4.1.232.11.2.10.1.0 MibStatusArray
.1.3.6.1.4.1.232.2.2.4.2.0 ProductName
.1.3.6.1.4.1.232.9.2.2.10.0
CntlrAgentLocation (get RIB info)
.1.3.6.1.4.1.232.11.2.10.3.0 HostGUID
Additional OIDs, like the following, can be serviced in order to cause HP SIM to collect additional
information, such as the specific GNU/Linux operating system type, and display it in the collections
server type column for a node.
.1.3.6.1.4.1.232.11.2.2.1.0 OsName
Agentless OID Data Types
The data served must be of a particular type and, in some cases, a specific form:
OID Value
SNMP
Data
Type Comments
MibStatusArray
.1.3.6.1.4.1.232.11.2.10.1.0
OCTET
String
Contains 8 bit
information and
should not be
reformatted in transit
ProductName .1.3.6.1.4.1.232.2.2.4.2.0
String Contains 7 bit
information and can
be reformatted in
transit.
CntlrAgentLocation .1.3.6.1.4.1.232.9.2.2.10.0
Integer It is 32 bit unsigned
data and should be
presented as an
Integer.
HostGUID .1.3.6.1.4.1.232.11.2.10.3.0
String Contains 7 bit
information and can
be reformatted in
transit.
Configuring the SNMP Agent to Service OIDs
The SNMP agent is provided either by the ucd-snmp package or the net-snmp package by the
GNU/Linux distribution installed. This document focuses on the net-snmp package because it is
considered the successor to ucd-snmp and is the most prevalent in the distributions available today.
However, it might be possible to accomplish this with another SNMP master agent.
The location of the SNMP master agent configuration file varies by GNU/Linux operating system
distribution, as shown here:
Linux Distribution SNMP Master Agent Configuration File
Red Hat Enterprise Linux
/etc/snmp/snmpd.conf
SUSE Linux Enterprise Server 9
/etc/snmpd.conf
Suse Linux Enterprise Server 10
/etc/snmp/snmpd.conf
Debian 4
/etc/snmp/snmpd.conf