HP Insight Control Performance Management 7.3 User Guide

Windows Server 2003/2008 issues
Table 6 (page 43) describes issues and solutions that you might encounter with Windows Server
2003/2008.
Table 6 Windows Server 2003/2008 issues
SolutionOccurs whenIssue
Add the site to the trusted zone. Be
aware that it lowers the security settings
for all content on the HP SIM pages.
The site is not accepted as a trusted
site by the security settings.
When accessing HP SIM for the first
time on a Windows Server
2003/2008 system, the following
message appears:
Content from Web site listed
below is being blocked by
Internet Explorer security
configuration.
Configure SNMP Service for Windows
Server 2003/2008:
Windows Server 2003/2008 is not
specifically configured to accept
Systems Insight Manager did not
identify the Windows Server
SNMP packets before HP SIM can2003/2008 (any edition) system as
a ProLiant server.
1. Open Service Console, right-click on
SNMP service, and then click
Properties.
collect and classify information about
ProLiant servers from the Management
Agents.
2. Select the Traps tab, and then verify
that “public” is entered as the
Community Name.
3. Click the Security tab, verify that
Accept SNMP packets from any hosts
is selected, and add the following
Community Settings:
• Community
Public◦
◦ Private
• Rights
◦ Read Only
◦ Read Create
4. Restart HP SIM service.
Windows Server 2003/2008 issues 43