HP Insight Control Performance Management 7.3 User Guide

Recommendations
Addressing performance issues with no hardware upgrade recommendation
The following scenario is an example of a recommendation that does not suggest additional
hardware.
In the following figure, a major status icon appears for the processors. Online Analysis recommends
that you determine if the processing load can be distributed more evenly across the available
processors.
This recommendation indicates that more than one logical processor exists in the system and at
least one processor is not fully utilized. Online Analysis recommendations for these types of
performance issues are component-specific.
Performing a static analysis
The following sections provide examples of using static analysis.
General usage
Performance issues are often introduced during system configuration. This condition might be
caused by a planning error, an error in following the prescribed configuration path, or as a result
of the system receiving many updates to a system over time. Regardless of the cause, performance
management can analyze static configurations and make suggestions about areas of concern
before a change occurs.
To see a static analysis report:
1. From the HP Insight Control/HP Matrix Operating Environment console toolbar, click
Reports→Performance Management→Static Analysis Report.
2. Select the pmp-xicc385pe9m server checkbox.
3. To display the Static Analysis Report for pmpserver, click Generate Report. These results can
be printed from the browser. See the following figure:
Recommendations 73