HP Insight Management 7.2 Update 2 Support Matrix

Table 78 Requirements for managed system — managing from an HP-UX CMS (continued)
Table 60 (page 64) lists the latest version of the Utilization Provider
provided with this release of the Matrix Operating Environment.
The Application Discovery WBEM Provider version A.04.01 or later
is required on all systems that Application Discovery will manage.
For the latest version, see Table 60 (page 64).
Application Discovery WBEM Provider
The gWLM agent is required on all systems that gWLM will manage.gWLM Agent
For details on the appropriate version(s) of gWLM, see HP Global
Workload Manager User Guide.
HP recommends that you upgrade to the latest version of the gWLM
agent. For the latest version, see Table 60 (page 64).
Install this software on HP-UX managed systems even if the system
does not use nPartitions.
nPartition Provider
• HP-UX 11i v2 on HP 9000 requires version B.23.01.07.05 or
later.
• HP-UX 11i v2 on HP Integrity requires version B.23.01.07.05 or
later.
• HP-UX 11i v3 requires version B.31.02.01 or later.
For the latest version, see Table 60 (page 64).
You must install VM Provider version 1.20 or later on HP Integrity
VM host systems. You can use earlier versions of the VM Provider
VM Provider
on individual virtual machines. Installed versions of HP Integrity
Virtual Machines, VM Provider, and VMGuestLib must be compatible.
Do not mix different versions of these components on the same
system.
For the latest version of the VM Provider, see Table 60 (page 64).
IMPORTANT: You cannot install the VM Provider on systems that
are running HP-UX 11i v3 (B.11.31).
The vPar Provider that was included with the March 2006 release
of HP-UX 11i v2 (B.11.23) does not work properly. With the March
vPar Provider
2006 version installed, Systems Insight Manager and Matrix
Operating Environment do not discover and display virtual partitions
correctly. The vPar Provider that is included with Matrix Operating
Environment fixes this problem. However, it presents the same version
number as the March 2006 version.
This problem does not occur with the HP-UX 11i v3 (B.11.31) vPar
Provider.
You can fix this problem by executing the following command on
each system where the vPar Provider has been installed:
/opt/wbem/bin/cimmof -n root/cimv2/vpar \
/opt/vparprovider/mof/HPUX_VParLocalPartition.mof
Alternatively, on systems that are running HP-UX 11i v2, you can
remove the installed version of the vPar Provider and install the
version delivered with the Matrix Operating Environment (or forcibly
reinstall the Matrix Operating Environment version).
For the latest version of the vPar Provider, see Table 60 (page 64).
Agents and providers bundled with the Matrix Operating Environment
For a list of the agents and providers that are bundled with the Matrix Operating Environment, see
Table 60 (page 64).
96 HP-UX CMS requirements