HP ProLiant SCCM 2012 Integration Kit (v 2013.02.0) User Guide

2 Support matrix
Supported System Center products
The kit can be installed on the following version of SCCM:
SCCM 2012 SP1 (running on Windows Server 2012 only) NEW
Supported target operating systems
The following operating system can be deployed to the target servers:
Windows Server 2008 R2 x64 (SP agnostic, non-Core editions only)
Windows Server 2012 x64 (SP and edition agnostic) NEW
Supported target servers
The following servers can be deployed to and maintained:
ProLiant DL385p Gen8ProLiant DL120 G7ProLiant BL2x220c G7
ProLiant DL560 Gen8ProLiant DL160 Gen8ProLiant BL420c Gen8
ProLiant DL580 G7ProLiant DL320e Gen8ProLiant BL460c G6 NEW
ProLiant DL585 G7ProLiant DL360 G6 NEWProLiant BL460c G7
ProLiant ML110 G7ProLiant DL360 G7ProLiant BL460c Gen8
ProLiant ML310e Gen8ProLiant DL360e Gen8ProLiant BL465c G7
ProLiant ML350 G6 NEWProLiant DL360p Gen8ProLiant BL465c Gen8
ProLiant ML350e Gen8ProLiant DL380 G6 NEWProLiant BL490c G7
ProLiant ML350p Gen8ProLiant DL380 G7ProLiant BL620c G7
ProLiant SL4540 Gen8 NEWProLiant DL380e Gen8ProLiant BL660c Gen8
ProLiant SL4545 G7 NEWProLiant DL380p Gen8ProLiant BL680c G7
ProLiant DL385 G7ProLiant BL685c G7
Restrictions
• Configuring iSCSI and FC HBAs is not supported. They need to be preconfigured.
• Performing a correct deployment to servers with multiple storage controllers or multiple disks
available (either multiple DAS or SAN attach) is not supported by default.
• Performing a deployment to servers with iSCSI storage is only supported on HP NC55#
controllers.
• Performing a PXE-based deployment through the HP NC540-series network adapters is not
supported.
Supported System Center products 5