HP ProLiant SCVMM 2012 Integration Kit (v 2013.09.0) User Guide
Table Of Contents
- HP ProLiant SCVMM 2012 Integration Kit (v 2013.09.0) User Guide
- Contents
- 1 Introduction
- 2 Support matrix
- 3 Installing and configuring the HP ProLiant SCVMM 2012 Integration Kit
- 4 Deploying Hyper-V to ProLiant servers
- 5 Reference
- 6 Troubleshooting
- 7 Support and other resources
- 8 Documentation feedback
- Glossary
3 Installing and configuring the HP ProLiant SCVMM 2012
Integration Kit
Considerations
• Do not install HP Insight Control server provisioning and SCVMM on the same network because
they both contain PXE servers.
Installation
1. Ensure that the following prerequisites are met:
• The server meets the requirements detailed in the Support Matrix.
• The logged in user has administrator level privileges.
• Microsoft .NET Framework 4.0 is installed.
2. On the SCVMM management server, start the installation from the HP Insight Control for
Microsoft System Center image by executing autorun.exe. Click Install, and then click HP
SCVMM 2012 Integration Kit.
3. On the License Agreement screen, click Accept.
4. On the Verify Prerequisites screen, click Verify.
If the verification fails, make the necessary corrections and click Verify again.
6 Installing and configuring the HP ProLiant SCVMM 2012 Integration Kit