HP ProLiant SCVMM 2012 Integration Kit (v 2014.02.0) User Guide

2 Support matrix
Supported System Center products and target operating systems
The kit can be installed on the following versions of SCVMM and can deploy the following operating
systems:
SCVMM 2012 R2SCVMM 2012 SP1Host OS \ SCVMM
Windows Server 2008 R2 SP1
2
Windows Server 2008 R2 SP1
2
Windows Server 2012
Windows Server 2012Windows Server 2012
Windows Server 2012 R2
1
Windows Server 2008 R2 SP1
2
Not supportedWindows Server 2012 R2
Windows Server 2012
Windows Server 2012 R2
Restrictions:
• Must be a management server with the console installed in order to access the PowerShell
cmdlets.
• In a high-availability configuration, must be the primary node.
•
1
Some drivers will fail to be injected into the boot image. Refer to the Troubleshooting section.
•
2
When deploying Windows Server 2008 R2 to UEFI servers, UEFI Optimized Boot must be
disabled and Secure Boot must be disabled.
Supported target servers
The following servers can be deployed and maintained:
DL560 Gen8DL360e Gen8BL660c Gen8BL420c Gen8
DL580 G7DL360p Gen8BL680c G7BL460c G7
DL580 Gen8 NEWDL380 G7BL685c G7BL460c Gen8
DL585 G7DL380e Gen8DL160 Gen8BL465c G7
ML350e Gen8 V2 NEWDL380p Gen8DL320e Gen8BL465c Gen8
DL385 G7DL320e Gen8 V2BL490c G7
DL385p Gen8DL360 G7BL620c G7
Restrictions:
• Hardware configuration is not supported.
• Performing a correct deployment to servers with multiple storage controllers or multiple disks
available (either multiple DAS or SAN attach) is not supported by default.
• Performing a PXE-based deployment through the HP NC540-series and NC530SFP+ network
adapter is not supported.
Supported System Center products and target operating systems 5