HP Device Monitor (v 1.2) for Microsoft System Center User Guide

NOTE: This option is not available when connected to DMS version 1.0.
• Add Virtual Connect Domain
Adds virtual connect domain.
Adding a virtual connect domain
1. Open the DMC.
NOTE: You must use an administrator account to run DMC.
2. Select the monitor connection to which you are adding the device.
The current devices on the connection are displayed in the Discovered Devices pane.
3. In the Actions pane, click Add Virtual Connect Domain.
The Add Virtual Connect Domain dialog box displays (see Figure 1 (page 10)).
Figure 1 Add Virtual Connect Domain dialog box
4. Enter the device IP Address or the DNS Name of the Virtual Connect Domain.
5. Enter the User Name and Password credentials for accessing the Virtual Connect Domain.
6. Click OK.
If the information is valid, the device is added to the Discovered Devices pane.
Adding a Linux or VMware ESX server
1. Open the DMC.
2. Select the monitor connection to which you are adding the device.
The current devices on the connection are displayed in the Discovered Devices pane.
3. In the Actions pane, click Add Linux or VMware ESX Server.
The Add Linux or VMware ESX Server dialog box is displayed.
10 Using the HP Device Monitor Console