Backing up and restoring HP Insight Management 7.3 Central Management Server (Windows)

Technical white paper | HP Insight Management 7.3
For the sample run, the results of the lsmanalyzer tool analysis follow:
ADVISORY: The lsmAnalyzer tool may report transient inconsistencies
if operations are in progress while the analysis is
performed. If unexpected issues are identified, run the
analysis again after the operations have completed.
Started analysis of storage volumes allocated to catalog-based SPEs.
Checking SPM3.........................................................[OK]
Checking cleanrun_PoolEntry_29
Remove storage volume "New 5.098 GiB volume in pool '\Disk
Groups\Default Disk Group' on array 'CH93_EVA4400'" from SPE
"cleanrun_PoolEntry_29"............................................[INPUT]
ISSUE: Storage volume "New 5.098 GiB volume in pool '\Disk
Groups\Default Disk Group' on array 'CH93_EVA4400'"
is allocated to SPE "cleanrun_PoolEntry_29". However
storage volume "New 5.098 GiB volume in pool '\Disk
Groups\Default Disk Group' on array 'CH93_EVA4400'"
does not exist in the SPM catalog. This can occur if
the volume was inadvertently deleted from the catalog
using the SPM GUI.
RESOLUTION: Remove storage volume "New 5.098 GiB volume in pool
'\Disk Groups\Default Disk Group' on array
'CH93_EVA4400'" from SPE "cleanrun_PoolEntry_29".
[ID012]
Checking SPM5........................................................[OK]
Completed analysis of storage volumes allocated to catalog-based SPEs.
Analysis summary:
3 checks performed
1 action needed
1 action requires input
0 errors
Analysis completed successfully. All issues identified in the above section
should be resolved before proceeding to the next section.
Started analysis of storage volumes that are not allocated to a catalog-
based SPE, but are presented to a WWN address within the range managed by
VCEM.
Checking \Virtual Disks\SPM\Volume4
Delete storage volume "\Virtual Disks\SPM\Volume4" in array "" from
SPM catalog.......................................................[INPUT]
ISSUE: Storage volume "\Virtual Disks\SPM\Volume4" is marked
as available in SPM. However Server WWN
50:01:43:80:02:A3:00:42 (VCEM, IN_USE) LUN 1 is
presented to storage volume "\Virtual
Disks\SPM\Volume4" in storage array "" and assigned
to VC Profile TC4phy-net01_13cd420e192.
55