Backing up and restoring HP Insight Management 7.3 Central Management Server (Windows)

Technical white paper | HP Insight Management 7.3
Matrix recovery management section
During this final section, the restored HP Matrix recovery management database is updated. To reduce the effort required to
re-create the post-backup recovery management configuration changes, you have the opportunity to use an exported
recovery management configuration file to replace the existing configuration in the restored database.
+----------------------------+
| Section 5 of 5 |
| Matrix recovery management |
+----------------------------+
Synchronizes Matrix recovery management state with underlying logical servers
and, optionally, with a saved Matrix recovery management configuration file
**** Analysis: Matrix recovery management configuration sync ****
**** Section 5 of 5, phase 1 of 1 ****
Analyzes each Matrix recovery management Recovery Group to ensure that the
associated Logical Server is present in the LSM database. An Matrix recovery
management export configuration file may be provided to recover post-backup
configuration changes.
You are recommended to supply an Matrix recovery management export file for
synchronization. This file should contain the latest Matrix recovery
management
configuration changes.
You may also proceed with a not fully up-to-date export file or with the state
restored from a backup. You must then review the Matrix recovery management
configuration at the end of mxsync execution and make the necessary additional
changes.
>>> Do you want to use an exported configuration file? If yes, please place
the file at the following location: C:\Program Files\HP\Insight
Recovery\conf\mxsync_config, and then type y. If you prefer to use the
existing database configuration, type n (Y/N): y
69