Installing and upgrading HP Insight Management 7.3 on Windows Server 2012 Failover Clusters

Technical white paper | HP Insight Management 7.3
Using the Cluster Validation Wizard to verify the storage configuration
The Cluster Validation Wizard runs a comprehensive suite of tests on your cluster, including its storage configuration. The
wizard should be run whenever you change the configuration of the cluster or replace a hardware component. Successful
completion of the wizard ensures that your cluster is properly configured and is a requirement for cluster support. The
wizard’s detailed test results aid in troubleshooting a broken cluster by isolating the system, network component, or
storage component that is failing.
When you run the wizard after installing Insight Management, if possible, select the storage setting that takes the services
or applications offline so that all the cluster disks can be tested. (Planned downtime may be needed.) Figure 13 shows this
setting.
Figure 13: Validate a Configuration Wizard
Appendix A: Summary of Insight Management cluster resources
Table 3. Summary of Insight Management cluster resources
Resource Name Resource Type Dependencies Service name Notes
cms-c17-matrix Group N/A N/A
Group “container” for
cluster resources
c17_matrix Physical Disk None N/A Disk V:
IP Address
15.199.192.147
IP Address None N/A
Virtual IP used to
connect to SIM
cms-c17-matrix Network Name
IP Address:
15.199.192.147
N/A
Network name of the
virtual IP address used
to connect to SIM
HP Capacity Advisor
Data Service
Generic Service
HP Global
Workload Manager
Central
Management
Server,
HP Systems
HP Capacity
Advisor Data
Service
42