HP Insight Diagnostics 9.3 User Guide

3 Using HP Insight Diagnostics
HP Insight Diagnostics contains the following primary tabs:
• Survey
• Diagnose
• Test (available only in Offline Edition)
• Status
• Log
• Help
Using the Survey tab
The HP Insight Diagnostics Survey feature displays system configuration information on the Survey
tab.
When Insight Diagnostics starts, summary information for the Overview category appears. To view
configuration details for a different subject:
1. Select the configuration details to view from the View Level list.
• Select Summary to view summary configuration information.
• Select Advanced to view detailed configuration information.
2. Select the subject to view from the Categories list:
• All displays all information about the system and subsystems.
• Overview displays general information about the system.
• Architecture displays the type of bus the system uses, the BIOS, and PCI-related information.
• Asset Control displays the product name, serial number, asset tag, and processor
information (system identification number).
• Communication displays information about the system parallel (LPT) port, serial (COM)
port, USB, and network interface controller.
• Firmware displays the firmware and BIOS revision information for the system controllers
and devices.
• Graphics displays information about the graphics subsystem, including the graphics card,
graphics mode, ROM, and video memory.
• Input Devices displays information about the type of keyboard, mouse, and other input
devices connected to the computer.
• Internal Conditions (if supported on system) displays information about the health of the
computer, including the fan, temperature, power supply, and health LED information.
• Memory displays detailed information about system memory.
• Miscellaneous displays information obtained from CMOS, BIOS data area, Interrupt
Vector table, TPM, and diagnostics component information.
• Operating System displays information on the OS, when run in online mode.
• Remote Management (if supported on system) displays information about iLO.
• Resources displays information about the system resources, real-time clock, and operating
system settings for certain settings, such as I/O and IRQs.
16 Using HP Insight Diagnostics