HP Insight Diagnostics 9.3 User Guide

• Test Progress displays the progress of the testing. This progress bar has following test modes:
Time—Time passed divided by total time selected (percentage of time completed).◦
◦ Loops—Loops run divided by total loops (percentage of loops completed).
◦ Single loop—The total percentage complete of all tests divided by total number of tests
(average test percentage completed).
The progress bar percentage changes based upon the kind of test mode is selected.
• Time displays the time elapsed for the specific test.
To cancel the test in progress, click Cancel.
To repeat the testing, click Retest.
To view all test failure information, view the Error Log on the Log tab.
Figure 13 Custom test results
NOTE: In the Figure 13 (page 25) the Testing in Progress bar represents the test in progress. The
bar progresses as the tests complete. It has no relation to the time required to complete the test.
The Log tab
The Log tab includes five logs containing historical testing and diagnosis information:
• Diagnosis Log displays the following details on the tested devices after Diagnose completes.
The pass/fail status◦
◦ The list of devices diagnosed
◦ The number of times Diagnose ran
◦ The number of times the test failed
The Log tab 25