HP Insight Management Agent 8.40 Microsoft Windows Event ID and SNKP Traps Reference Guide

Server agents 122
• cpqHoTrapFlags
• cpqRackName
• cpqRackUid
• cpqRackCommonEnclosureName
• cpqRackCommonEnclosureSerialNum
• cpqRackCommonEnclosureSparePartNumber
• cpqRackCommonEnclosureTrapSequenceNum
Supporting SNMP Trap Description: “Power subsystem AC facility input power exceeded in enclosure
[cpqRackCommonEnclosureName], in rack [cpqRackName].”
NT Event ID: 1175 (Hex)0x84350497 (cpqsvmsg.dll)
Log Severity: Warning (2)
Event Title: Power Subsystem Unknown Power Consumption
Log Message: There is an unknown power consumer drawing power.
SNMP Trap: cpqRackPowerUnknownPowerConsumption - 22033 in CPQRACK.MIB
Symptom: Unknown power consumption. There is an unknown power consumer drawing power.
User Action: Check the power enclosure and power supplies. Replace any failed or degraded power
supplies.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqRackName
• cpqRackUid
• cpqRackCommonEnclosureSerialNum
• cpqRackCommonEnclosureTrapSequenceNum
Supporting SNMP Trap Description: “Unknown power consumption in rack [cpqRackName].”
NT Event ID: 1176 (Hex)0x84350498 (cpqsvmsg.dll)
Log Severity: Warning (2)
Event Title: Power Subsystem Load Balancing Wire Missing
Log Message: The power subsystem load balancing wire missing.
SNMP Trap: cpqRackPowerChassisLoadBalancingWireMissing - 22034 in CPQRACK.MIB
Symptom: Power subsystem load balancing wire missing. The power subsystem load balancing wire
is missing.
User Action: Connect the load balancing wire.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqRackName
• cpqRackUid
• cpqRackCommonEnclosureName