HP Insight Management Agent 8.40 Microsoft Windows Event ID and SNKP Traps Reference Guide

Introduction 4
Introduction
This document contains a listing of the Microsoft
®
Windows Server
®
2003 Event Log messages
associated with SNMP traps, which are generated by the HP Insight Management Agents for Servers
for Windows
®
. Each event entry has the corresponding SNMP trap number used by the agents. Other
information on the events in this document includes Event Severity, Event Message, Event Message
Source, Event Symptom, and Supporting SNMP Trap Data.
Windows NT
®
event log format
The following pages contain HP Insight Management events that are entered into the Microsoft
®
Windows NT
®
Event Log when they occur.
Values are 32-bit values laid out as follows:
3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+-------+--+--+---------------------------------------------+---------------------------------------------------------------+
|Sev|C|R| Facility | Code |
+-------+--+--+---------------------------------------------+---------------------------------------------------------------+
where:
Sev—The severity code
00—Success
01—Informational
10—Warning
11—Error
C—The customer code flag
R—A reserved bit
Facility—The facility code (always “CPQ”)
Code—The facility’s status code—the event number; the upper byte refers to the HP Insight
Management Agent that served the event, the lower byte is the actual event number
Agent descriptions
• Foundation/Host Agent—cpqhsmsg
• Sever Agent—cpqsvmsg
• Storage Agent—cpqstmsg
• NIC Agent—cpqnimsg