HP Insight Management Agent 8.40 Microsoft Windows Event ID and SNKP Traps Reference Guide

Storage agents 40
• cpqHoTrapFlags
• cpqSsBoxFltTolPwrSupplyStatus
Supporting SNMP Trap Description: “A storage system power supply unit has become degraded.”
NT Event ID: 1107 (Hex)0xc4350453 (cpqstmsg.dll)
Log Severity: Error (3)
Event Title: SCSI Tape Drive Status Change.
Log Message: The tape drive with SCSI target %6 connected to SCSI bus %5 of the controller in slot
%4 has a new status of %2.
SNMP Trap: cpqTape4PhyDrvStatusChange - 5016 in CPQSCSI.MIB
Symptom: Tape Drive Status Change. The Storage Agent has detected a change in the status of a
Tape drive. The current physical drive status is indicated in the cpqTapePhyDrvStatus variable.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqTapePhyDrvCntlrIndex
• cpqTapePhyDrvBusIndex
• cpqTapePhyDrvScsiIdIndex
• cpqTapePhyDrvStatus
Supporting SNMP Trap Description: “Status is now [cpqTapePhyDrvStatus].”
NT Event ID: 1119 (Hex)0x8435045f (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: SCSI Tape Drive Head Needs Cleaning.
Log Message: The tape drive with SCSI target %6 connected to SCSI bus %5 of the controller in slot
%4 needs to have a cleaning tape inserted and run.
SNMP Trap: cpqTape3PhyDrvCleaningRequired - 5008 in CPQSCSI.MIB
Symptom: Tape Drive Cleaning Required trap. The Insight Agent has detected a tape drive that needs
to have a cleaning tape inserted and run. This causes the tape drive heads to be cleaned.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqTapePhyDrvCondition
Supporting SNMP Trap Description: “Status is now [cpqTapePhyDrvCondition].”
NT Event ID: 1120 (Hex)0x84350460 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: SCSI Tape Drive Cleaning Tape Needs Replacing.
Log Message: The tape drive with SCSI target %6 connected to SCSI bus %5 of the controller in slot
%4 needs the cleaning tape replaced.
SNMP Trap: cpqTape3PhyDrvCleanTapeReplace - 5009 in CPQSCSI.MIB