HP Insight Management Agent 8.40 Microsoft Windows Event ID and SNKP Traps Reference Guide

Storage agents 52
cpqFcTapeLibraryDoorStatus indicates the current tape library door status. The variable
cpqFcTapeLibraryScsiTarget indicates the SCSI ID of the tape library.
User Action: If the tape library door is open, close the tape library door.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqFcTapeCntlrWWN
• cpqFcTapeLibraryScsiBus
• cpqFcTapeLibraryScsiTarget
• cpqFcTapeLibraryScsiLun
• cpqFcTapeLibraryDoorStatus
Supporting SNMP Trap Description: “The door is [cpqFcTapeLibraryDoorStatus] for tape library.”
NT Event ID: 1176 (Hex)0x84350498 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Fibre Channel Tape Drive Status Change.
Log Message: The Fibre Channel tape drive on tape controller with world wide name “%4”, SCSI bus
%5, SCSI target %6, has a new status of %7.
SNMP Trap: cpqFcTapeDriveStatusChange - 16011 in CPQFCA.MIB
Symptom: Fibre Channel Tape Drive Status Change. This trap indicates that the agent has detected a
change in the status of a Fiber Channel Tape Drive. The variable cpqFcTapeDriveStatus indicates the
current tape status. The variable cpqFcTapeDriveScsiTarget indicates the SCSI ID of the tape drive.
User Action: If the tape is failed or is offline, check the tape and all fibre channel connections.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqFcTapeCntlrWWN
• cpqFcTapeDriveScsiBus
• cpqFcTapeDriveScsiTarget
• cpqFcTapeDriveScsiLun
• cpqFcTapeDriveStatus
Supporting SNMP Trap Description: “Status is now [cpqFcTapeDriveStatus] for a tape drive.”
Event ID: 1177 (Hex)0x84350499 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Fibre Channel Tape Drive Cleaning Required.
Log Message: The Fibre Channel tape drive on tape controller with world wide name “%4”, SCSI bus
%5, SCSI target %6, requires cleaning.
SNMP Trap: cpqFcTapeDriveCleaningRequired - 16012 in CPQFCA.MIB
Symptom: Fibre Channel Tape Drive Cleaning Required trap. The agent has detected a tape drive
that needs to have a cleaning tape inserted and run. This causes the tape drive heads to be cleaned.