Manualshelf

HP Insight Management Agents 9.0 Microsoft Windows Event ID and SNMP Traps Reference Guide

ManualsBrandsHP ManualsSoftwareHP Insight Management Agents for HP ProLiant 100 Series Servers
111112113114115116117118119120
Event identifier: cpqsvmsg.dll - 1803 (Hex)0xc435070b (Service Event)
Log Severity: Error (3)
Log Message: Unable to load a required library. This error can be caused by a corrupt or missing
file. Reinstalling the Server Agents or running the Emergency Repair procedure may correct this
error.
Event identifier: cpqsvmsg.dll - 1806 (Hex)0x8435070e (Service Event)
Log Severity: Warning (2)
Log Message: The Server Agent service is not running. The Server SNMP Agent has determined
that the Server Agent service is not running. Stop the SNMP service and restart the Server Agents
service. If the error persists, reinstalling the Server Agents may correct this error.
Event identifier: cpqsvmsg.dll - 1808 (Hex)0x44350710 (Service Event)
Log Severity: Information (1)
Log Message: The agent could not deliver trap %1. The agent was unable to use Asynchronous
Management to deliver a trap. This can be caused by a failure in the Remote Access Service or
by a missing or invalid configuration. Use the Management Agent control panel to verify the
Asynchronous Management configuration settings. Use the Network control panel to verify the
Remote Access configuration. If this error persists, reinstalling the Server Agents or the Remote
Access Service may correct this error. For more information, see the Asynchronous Management
documentation.
Event identifier: cpqsvmsg.dll - 3328 (Hex)0x84350d00 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to allocate memory. This indicates a low memory condition. Rebooting the
system may correct this error.
Event identifier: cpqsvmsg.dll - 3329 (Hex)0x84350d01 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read from the registry sub-key. This error can be caused by a corrupt
registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 3330 (Hex)0x84350d02 (Service Event)
Log Severity: Warning (2)
Log Message: Could not write the registry sub-key: “%1”. This error can be caused by a corrupt
registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 3331 (Hex)0x84350d03 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read the registry sub-key: “%1”. This error can be caused by a corrupt
registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 3332 (Hex)0x84350d04 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read the registry sub-key: “%1”. This error can be caused by a corrupt
registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 3333 (Hex)0x84350d05 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read the registry sub-key: “%1”. This error can be caused by a corrupt
registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqsvmsg.dll - 3342 (Hex)0x84350d0e (Service Event)
Log Severity: Warning (2)
118 Server agents