HP System Management Homepage 7.0 Installation Guide

6. Select IP Binding to enable the Subnet IP Address and NetMask.
The IP Binding dialog box enables you to bind to specific IP addresses that match a specific
Subnet IP Address or NetMask. It restricts the subnet you want to manage.
a. Select Enable IP Binding checkbox and enter the Subnet IP Address in the designated
field.
b. Enter the NetMask in the designated field.
c. Click Add, and the Subnet IP Address/NetMask appears in the dialog box. To delete a
Subnet IP Address/Netmask from the dialog box, select a Subnet IP Address/NetMask,
and click Delete. The Subnet IP Address/Netmask is removed from the dialog box.
Note: You can add up to five Subnet IP Address/NetMask pairs. If you enter an invalid
Subnet IP Address/Netmask pair, an error message appears indicating the Subnet IP
address or Netmask is invalid. Click OK. Enter a valid Subnet IP
address/Netmask and click Add again.
Note: The masking field is not required for IPv6 addresses.
7. Click Next. The IP Restricted Login dialog box appears. The IP Restricted Login dialog box
enables you to select specific IP addresses or IP address ranges to include or exclude from
gaining login access.
24 Installing HP SMH on a Windows operating system