HP System Management Homepage 7.0 Installation Guide

• SUSE Linux Enterprise Server 9 for x86 and AMD64/EM64T

• VMware ESX 3.5 update 5

• VMware ESX 4.0 update 1

• VMware ESX 4.0 update 2

• VMware ESX 4.1

• Novell Open Enterprise Server (OES 2)

• Citrix XEN 5.6

• Citrix XEN 5.5 U2

HP Integrity servers

• Microsoft Windows Server 2008 for Itanium-based systems, 64-bit

• Microsoft Windows Server 2008 R2 for Itanium-based systems, 64-bit

• Red Hat Enterprise Linux 5.0 Update 1

• Red Hat Enterprise Linux 4.0 Update 6

• SUSE Linux Enterprise Server (SLES) 10 Service Pack 1

• SUSE Linux Enterprise Server (SLES) 9 Service Pack 4

HP-UX

• HP-UX 11i v3 (B.11.31) for HP Integrity Servers and HP 9000 Servers

• HP-UX 11i v2 (B.11.23) for HP Integrity Servers and HP 9000 Servers

• HP-UX 11i v1 (B.11.11) for HP Servers and Workstations

NOTE: For Linux operating systems, Lightweight Directory Access Protocol (LDAP) is supported

on SUSE Linux Enterprise Server 9 and SUSE Linux Enterprise Server 10.

For Windows operating systems, SmartStart CD requires that all systems have a minimum of 256

MB of RAM.

HP-UX 11i v1 (B.11.11) Operating Environments are for PA-RISC systems only. HP-UX 11i v2

(B.11.23) Operating Environments (September 2004 and later). HP-UX 11i v3 (B.11.31) Operating

Environments (February 2007 and later) support both PA-RISC and Itanium-based operating systems.

NOTE: To install the HP SMH application, a minimum of 100 MB free disk space is required.

Supported browsers

For HP-UX Itanium-based or PA-RISC operating systems:

• Microsoft Internet Explorer 6.0 SP2

• Microsoft Internet Explorer 7.0 (SMH 2.2.9 or later)

• Microsoft Internet Explorer 8.0 is supported only in compatibility mode (HP SMH 3.0.2 or

later)

• Firefox 1.0.2

• Firefox 1.5

• Firefox 1.6

1. Follow the instructions to obtain HP SMH for ESX:

1. Go to the software and driver download page: http://www8.hp.com/us/en/support-drivers.html, select Drivers

and Software, and enter the server name, and then click Enter.

2. In the results page, select VMware ESX/ESXi as the Operating System.

3. Select Software – Systems Management.

4. Click on HP Management Agents for VMware ESX 4.x Only (Not for ESXi 4.x) link.

6 Installation requirements