Microsoft Windows Event ID and SNMP Traps Reference Guide

ManualsBrandsHP ManualsSoftwareHP Insight Management Agents for HP ProLiant 100 Series Servers

101

102

103

104

105

106

107

108

109

110

Log Message: There is not enough power to power on the server blade. The power enclosure

micro-controller was not found.

SNMP Trap: cpqRackServerPowerOnFailedPowerChassisNotFound - 22025 in CPQRACK.MIB

Symptom: Inadequate power to power on. There is not enough power to power on the server

blade. The power enclosure micro-controller was not found.

User Action: Check power enclosure connections or add power supplies.

Supporting SNMP Trap Data:

• sysName

• cpqHoTrapFlags

• cpqRackName

• cpqRackUid

• cpqRackServerBladeEnclosureName

• cpqRackServerBladePosition

• cpqRackServerBladeSparePartNumber

• cpqRackCommonEnclosureSerialNum

• cpqRackCommonEnclosureTrapSequenceNum

Supporting SNMP Trap Description: “Inadequate power to power on blade

[cpqRackServerBladePosition], in enclosure [cpqRackServerBladeEnclosureName], in rack

[cpqRackName].”

NT Event ID: 1168 (Hex)0x84350490 (cpqsvmsg.dll)

Log Severity: Warning (2)

Event Title: Server Power On Via Manual Override

Log Message: Server power on via manual override.

SNMP Trap: cpqRackServerPowerOnManualOverride - 22026 in CPQRACK.MIB

Symptom: Server power on via manual override. The server blade was powered on by a manual

override.

User Action: None.