Microsoft Windows Event ID and SNMP Traps Reference Guide

Log Severity: Warning (2)
Log Message: Unable to read “%1” from the registry. This error can be caused by a corrupt registry
or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqnimsg.dll - 267 (Hex)0x8435010b (Service Event)
Log Severity: Warning (2)
Log Message: Unable to write “%1” to the registry. This error can be caused by a corrupt registry
or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqnimsg.dll - 268 (Hex)0x8435010c (Service Event)
Log Severity: Warning (2)
Log Message: Unable to enumerate “%1” from the registry. This error can be caused by a corrupt
registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqnimsg.dll - 269 (Hex)0xc435010d (Service Event)
Log Severity: Error (3)
Log Message: The NIC Management Agent encountered a fatal error. The service is terminating.
The data contain the error code.
Event identifier: cpqnimsg.dll - 270 (Hex)0x8435010e (Service Event)
Log Severity: Warning (2)
Log Message: Unable to create thread. This error can be caused by a low memory condition.
Rebooting the server may correct this error.
Event identifier: cpqnimsg.dll - 271 (Hex)0x8435010f (Service Event)
Log Severity: Warning (2)
Log Message: Could not open the driver for device “%1”. This error can be caused by an improperly
installed adapter. Removing and reinstalling the device may correct the problem. The data contain
the error code.
Event identifier: cpqnimsg.dll - 272 (Hex)0x84350110 (Service Event)
Log Severity: Warning (2)
Log Message: Failure in driver %1. This error can be caused by an outdated driver version. Installing
a later version of the driver may correct the problem. The data contain the error code.
Event identifier: cpqnimsg.dll - 273 (Hex)0x84350111 (Service Event)
Log Severity: Warning (2)
Log Message: There were no physical adapters in team: “%1.” This error can be caused by
improperly installed drivers. Remove all device instances associated with the team and re-install
the drivers and team.
Event identifier: cpqnimsg.dll - 274 (Hex)0x84350112 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent cannot generate Traps due to a communication problem
with the NIC SNMP extension agent.
Event identifier: cpqnimsg.dll - 275 (Hex)0x44350113 (Service Event)
Log Severity: Information (1)
Log Message: Communication with the NIC SNMP extension agent has been restored. TRAPS can
now be sent.
Event identifier: cpqnimsg.dll - 276 (Hex)0x84350114 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent cannot communicate with the Token Ring Protocol
driver (CNMPROT.SYS).
122 NIC agents