Microsoft Windows Event ID and SNMP Traps Reference Guide

Log Severity: Warning (2)
Log Message: The %1 Agent is older than other components. The %1 Agent is older than the other
components of the Insight Agents. Reinstall the entire Insight Agents package to correct this error.
Event identifier: cpqnimsg.dll - 1029 (Hex)0x84350405 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC SNMP Management Agent has failed to refresh data associated with key
%1. Check to make sure management service is up and running. This may cause data received
from Compaq SNMP agent to be old or invalid.
Event identifier: cpqnimsg.dll - 1030 (Hex)0xc4350406 (Service Event)
Log Severity: Error (3)
Log Message: The NIC SNMP Management Agent was unable to process a SNMP request because
the Insight Agents Service is not up and running.
Event identifier: cpqnimsg.dll - 1031 (Hex)0x44350407 (Service Event)
Log Severity: Information (1)
Log Message: The NIC SNMP Management Agent has continued refreshing data for the key
associated with %1.
Event identifier: cpqnimsg.dll - 1032 (Hex)0x84350408 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read security configuration information. SNMP sets have been disabled.
Cause: This can be caused by an invalid or missing configuration or by a corrupt registry.
Reinstalling the Insight Agents may correct this problem.
Event identifier: cpqnimsg.dll - 1033 (Hex)0x44350409 (Service Event)
Log Severity: Information (1)
Log Message: The SNMP Insight Agent will allow SNMP sets.
Event identifier: cpqnimsg.dll - 1034 (Hex)0x4435040a (Service Event)
Log Severity: Information (1)
Log Message: The SNMP Insight Agent will not allow SNMP sets.
Event identifier: cpqnimsg.dll - 1035 (Hex)0xc435040b (Service Event)
Log Severity: Error (3)
Log Message: Unable to load a required library. This error can be caused by a corrupt or missing
file. Reinstalling the Insight Agents or running the Emergency Repair procedure may correct this
error.
Event identifier: cpqnimsg.dll - 1036 (Hex)0x8435040c (Service Event)
Log Severity: Warning (2)
Log Message: The NIC SNMP Management Agent was unable to forward an SNMP trap to the
Compaq Remote Insight Board trap due to processing error. The data contains the error code.
Event identifier: cpqnimsg.dll - 1037 (Hex)0x8435040d (Service Event)
Log Severity: Warning (2)
Log Message: The NIC SNMP Management Agent was unable to get last modification time for
key %1.
Event identifier: cpqnimsg.dll - 1038 (Hex)0x8435040e (Service Event)
Log Severity: Warning (2)
Log Message: The Management Agent service is not running. The SNMP Management Agent has
determined that the Management Agent service is not running. Stop the SNMP service and restart
Event Identifiers 300-1293 125