Microsoft Windows Event ID and SNMP Traps Reference Guide

Log Severity: Warning (2)
Log Message: The External Status MIB Agent got an unexpected error code while waiting for an
event. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4363 (Hex)0x8435110b (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent did not respond to a request. The data contains the
error code.
Event identifier: cpqhsmsg.dll - 4364 (Hex)0x8435110c (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent received an unknown action code from the service.
The data contains the action code.
Event identifier: cpqhsmsg.dll - 4365 (Hex)0x8435110d (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not get the system type. The data contains the
error code.
Event identifier: cpqhsmsg.dll - 4402 (Hex)0x84351132 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not create an SNMP session. The data contains
the error code.
Event identifier: cpqhsmsg.dll - 4403 (Hex)0x84351133 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent SNMP request failed. The data contains the error
code.
Action: Complete the following steps:
1. Be sure that the SNMP service is configured to allow SNMP requests from “localhost.”
2. Be sure that there is an adequate amount of free memory.
Event identifier: cpqhsmsg.dll - 4405 (Hex)0x84351135 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not set the variable because it is unsupported.
The data contains the error code.
Event identifier: cpqhsmsg.dll - 4406 (Hex)0x84351136 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not set the variable because the value is invalid
or out of range. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4407 (Hex)0x84351137 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent is not loaded. Sets are not available. The data contains
the error code.
Event identifier: cpqhsmsg.dll - 4608 (Hex)0x84351200 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to allocate memory. This indicates a low memory condition. Rebooting the
system will correct this error.
Event identifier: cpqhsmsg.dll - 4609 (Hex)0x84351201 (Service Event)
Log Severity: Warning (2)
Event Identifiers 4352-4626 23