Microsoft Windows Event ID and SNMP Traps Reference Guide

SNMP Trap: cpqFca2AccelBadDataTrap - 16018 in CPQFCA.MIB
Symptom: External Array Accelerator Board Bad Data. This trap indicates that the agent has
detected an Array Accelerator Cache Board that has lost battery power. If data was being stored
in the accelerator memory when the system lost power, that data has been lost.
User Action: Verify that no data has been lost.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqSsChassisName
• cpqSsChassisTime
• cpqFcaAccelBoxIoSlot
• cpqFcaCntlrModel
• cpqFcaAccelSerialNumber
• cpqFcaAccelTotalMemory
Supporting SNMP Trap Description: “Accelerator lost battery power. Data Loss possible.”
NT Event ID: 1150 (Hex)0xc435047e (cpqstmsg.dll)
Log Severity: Error (3)
Event Title: External Array Accelerator Battery Failed.
Log Message: The array accelerator board attached to the external controller in I/O slot %5 of
array “%4” is reporting a battery failure.
SNMP Trap: cpqFca2AccelBatteryFailed - 16019 in CPQFCA.MIB
Symptom: External Array Accelerator Board Battery failed. This trap indicates that the agent has
detected a battery failure associated with the Array Accelerator Cache Board.
User Action: Replace the Accelerator Cache Board.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqSsChassisName
• cpqSsChassisTime
• cpqFcaAccelBoxIoSlot
• cpqFcaCntlrModel
• cpqFcaAccelSerialNumber
• cpqFcaAccelTotalMemory
Supporting SNMP Trap Description: “Battery status is failed.”
NT Event ID: 1151 (Hex)0xc435047f (cpqstmsg.dll)
Log Severity: Error (3)
Event Title: External Array Controller Status Change.
Log Message: The external controller in I/O slot %5 of array “%4” has a new status of %6.
SNMP Trap: cpqFca2CntlrStatusChange - 16020 in CPQFCA.MIB
Symptom: External Array Controller Status Change. This trap indicates that the agent has detected
a change in the status of an External Array Controller. The variable cpqFcaCntlrStatus indicates
the current controller status.
Event Identifiers 1101-1199 39