Microsoft Windows Event ID and SNMP Traps Reference Guide

Supporting SNMP Trap Data:
sysName
cpqHoTrapFlags
cpqSsChassisName
cpqSsChassisTime
cpqSsTempSensorLocation
cpqSsTempSensorStatus
cpqSsTempSensorCurrentValue
Supporting SNMP Trap Description: “Storage system temperature sensor status changed to
[cpqSsTempSensorStatus].
NT Event ID: 1156 (Hex)0x84350484 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: SCSI Tape Library Failed.
Log Message: The SCSI tape library with SCSI target %6 connected to SCSI bus %5 of the controller
in slot %4 has encountered an error.
SNMP Trap: cpqTape3LibraryFailed - 5010 in CPQSCSI.MIB
Symptom: Tape Library Error. The Insight Agent has detected that an autoloader unit has encountered
an error.
Supporting SNMP Trap Data:
sysName
cpqHoTrapFlags
cpqTapeLibrarySerialNumber
Supporting SNMP Trap Description: “Tape library [cpqTapeLibrarySerialNumber] is not operational.
NT Event ID: 1157 (Hex)0x84350485 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: SCSI Tape Library OK.
Log Message: The SCSI tape library with SCSI target %6 connected to SCSI bus %5 of the controller
in slot %4 has recovered from errors.
SNMP Trap: cpqTape3LibraryOkay - 5011 in CPQSCSI.MIB
Symptom: Tape Library Okay. The Insight Agent has detected that an autoloader unit has recovered
from errors.
Supporting SNMP Trap Data:
sysName
cpqHoTrapFlags
cpqTapeLibrarySerialNumber
Supporting SNMP Trap Description: “Tape Library [cpqTapeLibrarySerialNumber] Recovered.
NT Event ID: 1158 (Hex)0x84350486 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: SCSI Tape Library Degraded.
Log Message: The SCSI tape library with SCSI target %6 connected to SCSI bus %5 of the controller
in slot %4 is in a degraded condition.
SNMP Trap: cpqTape3LibraryDegraded - 5012 in CPQSCSI.MIB
42 Storage agents