Microsoft Windows Event ID and SNMP Traps Reference Guide

Log Message: The tape library at location “%4”, has a new door status of %7.
SNMP Trap: cpqExtTapeLibraryDoorStatusChange - 16027 in CPQFCA.MIB
Symptom: External Tape Library Door Status Change. This trap indicates that the agent has detected
a change in the door status of an External Tape library. The variable cpqFcTapeLibraryDoorStatus
indicates the current tape library door status.
User Action: If the tape library door is open, close the tape library door.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqFcTapeLibraryCntlrIndex
• cpqFcTapeLibraryScsiBus
• cpqFcTapeLibraryScsiTarget
• cpqFcTapeLibraryScsiLun
• cpqFcTapeLibraryModel
• cpqFcTapeLibraryFWRev
• cpqFcTapeLibrarySerialNumber
• cpqFcTapeLibraryLocation
• cpqFcTapeLibraryDoorStatus
Supporting SNMP Trap Description: “The door is [cpqFcTapeLibraryDoorStatus] for tape library.”
NT Event ID: 1199 (Hex)0x843504af (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Drive Array Controller Status Change.
Log Message: The Drive Array Controller in %7 has a new status of %5.
SNMP Trap: cpqDa6CntlrStatusChange - 3033 in CPQIDA.MIB
Symptom: Controller Status Change. This trap indicates that the agent has detected a change in
the status of a drive array controller. The variable cpqDaCntlrBoardStatus indicates the current
controller status.
User Action: If the board status is generalFailure(3), you may need to replace the controller. If the
board status is cableProblem(4), check the cable connections between the controller and the storage
system.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqDaCntlrHwLocation
• cpqDaCntlrIndex
• cpqDaCntlrBoardStatus
• cpqDaCntlrModel
• cpqDaCntlrSerialNumber
• cpqDaCntlrFWRev
• cpqDaAccelTotalMemory
Supporting SNMP Trap Description: “Status is now [cpqDaCntlrBoardStatus].”
Event Identifiers 1101-1199 57