Microsoft Windows Event ID and SNMP Traps Reference Guide

SNMP Trap: cpqDa6TapeLibraryDoorStatusChange - 3042 in CPQIDA.MIB
Symptom: Tape Library Door Status Change. This trap indicates that the agent has detected a
change in the door status of a tape library. The variable cpqDaTapeLibraryDoorStatus indicates
the current tape library door status. The variable cpqDaTapeLibraryScsiTarget indicates the SCSI
ID of the tape library.
User Action: If the tape library door is open, close the tape library door.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqDaCntlrHwLocation
• cpqDaTapeLibraryCntlrIndex
• cpqDaTapeLibraryScsiBus
• cpqDaTapeLibraryScsiTarget
• cpqDaTapeLibraryScsiLun
• cpqDaTapeLibraryModel
• cpqDaTapeLibraryFWRev
• cpqDaTapeLibrarySerialNumber
• cpqDaTapeLibraryDoorStatus
Supporting SNMP Trap Description: “The door is [cpqDaTapeLibraryDoorStatus] for tape library.”
NT Event ID: 1209 (Hex)0x843504b9 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Drive Array Tape Drive Status Change.
Log Message: The tape drive in %4, SCSI bus %5, SCSI target %6 has a new status of %7.
SNMP Trap: cpqDa6TapeDriveStatusChange - 3043 in CPQIDA.MIB
Symptom: Tape Drive Status Change. This trap indicates that the agent has detected a change in
the status of a tape drive. The variable cpqDaTapeDrvStatus indicates the current tape status. The
variable cpqDaTapeDrvScsiIdIndex indicates the SCSI ID of the tape drive.
User Action: If the tape is failed, check the tape and all SCSI connections.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqDaCntlrHwLocation
• cpqDaTapeDrvCntlrIndex
• cpqDaTapeDrvBusIndex
• cpqDaTapeDrvScsiIdIndex
• cpqDaTapeDrvLunIndex
• cpqDaTapeDrvName
• cpqDaTapeDrvFwRev
• cpqDaTapeDrvSerialNumber
• cpqDaTapeDrvStatus
Supporting SNMP Trap Description: “Status is now [cpqDaTapeDrvStatus] for a tape drive.”
62 Storage agents