HP Insight Management WBEM Providers 2.8 for Windows Server 2003 and Windows Server 2008 Data Sheet

Table 13-2 Class: HP_EthernetPort
Property name Property implementation
CIM_ManagedSystemElement
Name Physical Device Object (PDO) name (for example,
\Device\NTPNP_PCI0017)
HealthState 5 (OK) if port has link, 20 (Major Failure) otherwise
OperationalStatus[0] 2 (OK) if port has link, 6 (Error) otherwise
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledDefault 2 (Enabled). Disabled ports are not modeled
EnabledState 5 (Not Applicable)
CIM_LogicalDevice
Key:CreationClassName HP_WinEthernetPort
Key:DeviceId System GUID for the port
IdentifyingDescriptions[] 0 (Slot),1 (Hardware Location), 2 (Spare Part Number)
OtherIdentifyingInfo[] Value correspond to IdentifyingDescriptions[] property.
A value of 4456540for Slot indicates an embedded
nic.
Key:SystemCreationClassName HP_ ComputerSystem.SystemCreationClassName
Key:SystemName HP_ComputerSystem.Name
CIM_LogicalPort
PortType Port Type. See CIM_EthernetPort mof for possible
values.
Speed The current bandwidth of the port in bits per second.
CIM_NetworkPort
ActiveMaximumTransmissionUnit Current maximum transmission unit in bytes.
AutoSense True, if port is capable of auto negotiating speed
and/or duplex, False otherwise.
FullDuplex True, if port is operating in full duplex. Not
implemented if port does not have link.
LinkTechnology 2 (Ethernet)
NetworkAddresses[0] The current MAC address of the port.
PermanentAddress The permanent MAC address of the port.
PortNumber Port number for multi-port adapters. Not implemented
for single port adapters.
CIM_EthernetPort
HP_EthernetPort
VirtualPortNumber Virtual Port Number for FlexNics