Using the HP Rapid Deployment Pack 3.7 to Deploy Microsoft Windows Server 2003 for IA64

1. Customize the Read Integrity RX/BL Array Configuration {LinuxPE} job. For instructions,
see the “Customizing and running a Read HW Configuration job” (page 21). The customized
job results should appear as depicted in the following figure.
2. Drag and drop the following jobs, in sequence, to the target system icon:
• Read Integrity RX/BL Array Configuration {LinuxPE} (customized)
• Read Integrity RX/BL HBA Configuration [server specific] {LinuxPE}
• Read Integrity RX/BL System Configuration {LinuxPE}
NOTE: When the first jobs is dragged and dropped to the target system icon, you can select to
start the job later, allowing you to drag and drop the remaining jobs before the first job begins.
Reschedule all remaining jobs, in order, to run after the first one.
Read Image jobs (group 2)
Some RDP jobs, like the Read Image jobs, run in both LinuxPE and production Windows Server
2003. Therefore, these jobs have internal operating system reboots (reboots from LinuxPE to
Windows and vice-versa).
Because of this feature, jobs with internal operating system reboots cannot directly benefit from
the Set ACPI Mode jobs, but the Set ACPI tasks must be copied to specific key places, depending
on each job.
The following are requirements to complete the steps in this section:
• The target system is powered on and running one of the following Windows operating
systems:
— Windows Server 2003 SP1 or SP2, Enterprise Edition for IA64
— Windows Server 2003 SP2, DataCenter Edition for IA64
• The HP ISP version 5.2 or later is correctly installed on the target system.
• The Altiris Agent is correctly installed and running on the target system and connected to
the Altiris Deployment Server.
Read Image jobs (group 2) 23