A.05.70 HP Insight Remote Support Advanced Service Brief: Read Before Installing (October 2011, 5900-1724)

8
Table 2 Required Managed System Communication Protocols and Components for SAN Services Devices
Hardware Platform Required Protocols
Notes
Switches
MCData SNMPv1
Brocade
QLogic
Cisco
ProCurve
Validation
After you have installed HP Insight Remote Support Advanced and completely configured both the
CMS and your Managed Systems to communicate with each other (as directed in the HP Insight
Remote Support Advanced Central Management Server Configuration Guide) you can validate that
the communication is working by initiating a test event between the Managed Systems and the
CMS. See the HP Insight Remote Support Advanced Managed Systems Configuration Guide for
more information.
Required Reading and Useful References
Required Reading
The following documents are required for a successful Insight Remote Support Advanced
installation. Use this documentation to avoid installation and configuration failures.
All documents in this list can be found at:
http://www.hp.com/go/insightremoteadvanced-docs
HP Insight Remote Support Advanced Release Notes
To verify that your Managed Systems and CMS are supported before you install.
HP Insight Remote Support Advanced Central Management Server Configuration Guide
To install, configure, and validate your Insight Remote Support Advanced solution.
HP Insight Remote Support Advanced Managed Systems Configuration Guide
To configure your Managed Systems correctly.
References
The following web pages and/or documents will help you learn more about the given topic:
ProLiant Support Pack (PSP) information
http://h18013.www1.hp.com/products/servers/management/psp/index.html?jumpid=servers/psp
WBEM Information
http://h18013.www1.hp.com/products/servers/management/wbem/
index.html?jumpid=reg_R1002_USEN
WBEM Providers Supported Systems
http://h18013.www1.hp.com/products/quickspecs/12927_div/
12927_div.html#Technical%20Specifications