A.05.80 HP Insight Remote Support Advanced and Remote Device Access Security Overview (October 2012)

ProLiant Linux Managed Systems
Table C.11. ProLiant Linux Connectivity - Firewall/Port Requirements
Protocol Ports Source Destination Function Configurable Optional
UDP 161 CMS Managed
Systems
SNMP. This is the standard port used by SNMP agents on
managed systems. The CMS sends requests to devices on
this port.
No Required
UDP 162 Managed
Systems
CMS SNMP Trap. This is the standard port used by SNMP
managers for listening to traps.
No Required
ICMP N/A CMS Managed
Systems
Provides system reachability (ping) check during system
discovery and before other operations. Note that HP SIM
can be configured to use TCP port 5989 to simplify firewall
settings.
No Recommended
TCP 5989 CMS Managed
Systems
Secured WBEM CI-MOM protocol over HTTPS/SOAP.
This port is used to communicate with WBEM end point
nodes.
Yes Optional
TCP 7906 Managed
Systems
CMS Secure HTTP (HTTPS) port used by the listener running in
the Director's Web Interface. The Web browser connects to
this port in the URL (e.g.
https://target.sys.name.here:7906)
No Optional
TCP 50001 Managed
Systems
CMS HP SIM HTTPS/SOAP No Optional
TCP 50002 Managed
Systems
CMS HP SIM HTTPS/SOAP with client certificate authentication No Optional
TCP 50004 Managed
Systems
CMS WBEM event receiver (HTTP and HTTPS) Yes Optional
HP Insight Remote Support Advanced and Remote Device Access (A.05.80)Page 69 of 97
Security Overview
Appendix C: Summary of Network Ports for Servers