A.05.80 HP Insight Remote Support Advanced and Remote Device Access Security Overview (October 2012)

Summary of Network Ports for Networking
The following tables summarize all ports that might be used in Insight Remote Support Advanced for Networking. See Table B-1 for ports that are
required for basic system operation.
E-Series Switch Managed Systems
Table E.1. E-Series Switch Connectivity - Firewall/Port Requirements
Protocol Ports Source Destination Function Configurable Optional
UDP 161 CMS Managed
Systems
SNMP. This is the standard port used by SNMP agents on
managed systems. The CMS sends requests to devices on
this port.
No Required
UDP 162 Managed
Systems
CMS SNMP Trap. This is the standard port used by SNMP
managers for listening to traps.
No Required
ICMP N/A CMS Managed
Systems
Provides system reachability (ping) check during system
discovery and before other operations. Note that HP SIM
can be configured to use TCP port 5989 to simplify firewall
settings.
No Recommended
TCP 22 CMS Managed
Systems
SSH: Remote Data Collection Yes Optional
Appendix E
HP Insight Remote Support Advanced and Remote Device Access (A.05.80)Page 81 of 97