SmartSetup Scripting Toolkit Deployment: HP Integrity Servers with Linux

Table 6-8 Error Codes (continued)
ReasonErrorCode
error does not occur. However, if the controller does not
support migration, this error occurs.
The Logical Drive ID is not valid.
Invalid Logical Drive
2834
The Logical Drive command is missing from the script file.
Some commands were found that require a Logical Drive to
work on.
Logical Drive not specified
2835
The Logical Drive ID in the script file does not match the
Logical Drive ID of the newly created logical drive. For
New Logical Drive ID does not
match the next available Logical
Drive ID
2836
example, if you already have Logical Drive 1 and the script
file attempts to create Logical Drive 3 (without Logical Drive
2), the script generates this error. This error can occur when
using an input file with logical drive numbers that are not
sequential. In this case, the logical drive numbers need to be
changed so that they are sequential in the input file.
When running in Configure mode, this error occurs when
the Logical Drive ID in the script file already exists in the
New Logical Drive ID already
exists
2837
configuration. Configure mode can only create new logical
drives.
The controller does not allow a new logical drive to be
created. This could be because there is no free space on the
Cannot create Logical Drive
2838
array, or the maximum number of logical drives has already
been reached.
The controller does not support migration, or the current
configuration of the controller does not allow migration to
occur.
Cannot migrate Logical Drive
Raid
2839
The controller does not support migration, or the current
configuration of the controller does not allow migration to
occur.
Cannot migrate Logical Drive
Stripe Size
2840
The controller does not support extension, or the current
configuration of the controller does not allow extension to
Cannot extend Logical Drive
2841
occur. For example, there might be no free space on an array,
so extension is not supported for the logical drive.
The specified RAID is invalid or is not possible with the
current configuration.
Invalid Raid
2842
The specified size is invalid or is not possible with the current
configuration.
Invalid Size
2843
The specified stripe size is invalid, is not supported with the
current RAID level, or is not supported with the current
configuration.
Invalid Stripe Size
2844
You cannot change the max boot on a configured logical
drive. This leads to data loss.
Cannot change Logical Drive
Sectors
2846
The specified Max Boot setting is invalid, or is not supported
with the current configuration.
Invalid Sectors
2845
The current controller configuration does not support
changing the logical drive Array Accelerator state.
Cannot change Logical Drive
Array Accelerator Setting
2848
The specified Array Accelerator setting is invalid or is not
supported with the current configuration.
Invalid Array Accelerator
Setting
2847
There was a problem communicating with one or more
controllers.
Error communicating with
Controller
290
64 Utilities Reference