HP Superdome 2 Partitioning Administrator Guide (5900-2540, December 2012)

12/1 Empty /Invalid - -

12/2 Empty /Invalid - -

* D-Deconfigured I-Indicted

[Partition]

Par State/ Status* # of # of ILM/ Partition Name

Num RunState Blades IOBays SLM (first 15

(GB)** characters)

=== ======================= ======= ====== ====== ============= ===============

* D-Degraded

** Actual allocated for Active and User requested for Inactive partitions

2. Create an nPartition with one blade and one I/O bay using the following command:

parcreate -P nPar0002 -a blade:1/2:::: -a io:5/1::

Command succeeded

The following output is displayed:

parstatus -P

[Partition]

Par State/ Status* # of # of ILM/ Partition Name

Num RunState Blades IOBays SLM (first 15

(GB)** characters)

=== ======================= ======= ====== ====== ============= ===============

2 Inactive /DOWN OK 1 1 16.0/112.0 nPar0002

* D-Degraded

** Actual allocated for Active and User requested for Inactive partitions

NOTE: The nPartition is created with the default settings for most of the nPartition attributes.

Some of the default settings are:

(i) ILM/SLM ratio - 1:7

(ii) ILM granularity - 1024 MB

(iii) SLM granularity - 1024 MB

(iv) Hyperthreading - Enabled

(v) Defaults assigned for partition identifier and parspec name (1 and ps0001).

For more information on creating nPartitions, see “Creating and configuring nPartitions” (page

37).

36 Planning nPartitions