HP-UX Virtual Partitions Administrator Guide (includes A.05.07) (5900-1229, September 2010)

Example:
— To display the file /stand/notes.txt
MON> cat notes.txt
10/13/2001: built new kernel today. if problems arise, revert to saved kernel vmunix.original
• cbufpartition_name displays the contents of the console buffer of partition_name
• clear_pending clears a pending Reboot for Reconfiguration. If there is a pending Reboot
for Reconfiguration within the nPartition, no virtual partitions can be rebooted until all the
virtual partitions within the given nPartition are shut down and the involved vPars Monitor
is rebooted. If Reboot for Reconfiguration has been set in error, the clear_pending
command clears it, enabling virtual partition boots.
• help help or ? lists all vPars Monitor commands
• lifls lists the files in the LIF area
• getauto displays the contents of the AUTO file in the LIF area
Example:
— MON> getauto
hpux /stand/vpmon
• log displays the contents, including warning and error messages, of the vPars Monitor
log. The vPars Monitor log holds up to 16 KB of information in a circular log buffer. The
information is displayed in chronological order.
• ls [-alniFH] [directory] lists the contents of directory. This command is similar
to the Unix ls command.
directory must be on a HFS file system. /stand is the default directory
The ls command-line options are the same as the Unix shell lsoptions. For detailed
explanations, see the ls(1M) manpage. In brief:
all entries
-a
long listing
-l
numerical UIDs and GIDs
-n
inode
-i
appends a character after the entry, depending on the file type, such as a / (slash) for a directory-F
For example, to view the listing of files in winona2’s /stand directory:
MON> ls /stand
lost+found ioconfig bootconf system
system.d vmunix dlkm.vmunix.prevbuild
kernrel rootconf vpdb vpmon.dmp
vmunix.backup system.prev vmunix.prev dlkm
vpdb.backup vpmon
• monadmin controls the vPars flexible administrative capability feature, as described in
Chapter 11: “vPars Flexible Administrative Capability” (page 295). For usage information,
see “monadmin” (page 298).
• scan lists all hardware discovered by the vPars Monitor and indicates which virtual
partition owns each device.
• settime [MM DD YYYY hh mm ss] sets the system's real time clock. Acceptable date
range is 1-1-1970 00:00:00 to 12-31-2034 23:59:59.
• threads controls the use of hyperthreading on servers with dual core Intel Itanium
processors. For usage information, see “CPU: Hyperthreading ON/OFF (HT ON/OFF)”
(page 211).
138 vPars Monitor and Shell Commands