HP-UX Virtual Partitions Administrator Guide (includes A.05.07) (5900-1229, September 2010)

CPU: Specifying Min and Max Limits
The syntax to specify min and max CPUs assigned to a virtual partition is:
-[a|m] cpu:::[min][:max]
where:
-a is adding (used with vparcreate or vparmodify)
-m is modifying (used with vparmodify)
min
is the minimum number of CPUs for the virtual partition to boot and the minimum number
of CPUs that must remain assigned to the partition
max
is the maximum number of CPUs that can be assigned to the virtual partition
NOTE: The virtual partition must be in the down state to set the min or max value.
The total count of CPUs in the virtual partition must always be greater than or equal to min and
less than or equal to max.
See “CPU: Syntax, Rules, and Notes” (page 240) regarding the new concepts and count rules for
min.
Examples
• To set the minimum number of CPUs to 2:
keira1# vparmodify -p keira2 -m cpu:::2
• To set the minimum number of CPUs to 2 and the maximum to 4:
keira1# vparmodify -p keira2 -m cpu:::2:4
CPU: Adding and Deleting by Total
The basic syntax for adding and deleting CPUs is:
-a|d|m cpu::num
where:
-a|d|m specifies adding, deleting, or modifying the total count of CPUs
num
specifies the number of CPUs
236 CPU, Memory, and I/O Resources (A.04.xx)