HP-UX Virtual Partitions Administrator Guide (includes A.05.07) (5900-1229, September 2010)

0/0/2/1/01/0/1/1/0/4/00/0/1/1/0/4/0
LAN
owned by keira1
console port (PA-RISC
Only)
AUTOMANUALAUTO
Autoboot
winona3winona2winona1Partition Name
total = 1
min = 1
total = 2
min = 2
paths = 41,45
total = 2
min = 2
Bound CPUs (A.03.xx)
three CPUs are available
Unbound CPUs
(A.03.xx)
1280 MB1280 MB1024 MB
Memory
0.5
1.4
0.8
1.10
0.0
0.4
I/O LBAs
1.4.0.0.5.00.8.0.0.5.00.0.2.0.6.0
Boot Path
0.5.0.0.4.01.10.0.0.4.00.0.0.0
LAN
owned by winona1
console port (PA-RISC
Only)
AUTOAUTOAUTO
Autoboot
Mixed HP-UX 11i v1/v2 vPars Environments in vPars A.04.05
Beginning with vPars A.04.05, you can have a mixed HP-UX 11i v1/v2 vPars environment on
PA-RISC systems only. A mixed HP-UX 11i v1/v2 vPars environment enables you to have a
vPars A.04.05 Monitor and database that supports both virtual partitions running vPars A.04.05
on HP-UX 11i v2 (11.23) and virtual partitions running vPars A.03.05 on HP-UX 11i v1 (11.11).
An example mixed HP-UX 11i v1/v2 vPars environment looks like the following:
Table 3-1 Mixed HP-UX 11i v1/v2 vPars Environment
HP-UX 11i v1 (11.11)
running vPars A.03.05
HP-UX 11i v2 (11.23)
running vPars A.04.05
HP-UX 11i v1 (11.11)
running vPars A.03.05
HP-UX 11i v1 (11.11)
running vPars A.03.05
HP-UX 11i v2
(11.23) running
vPars A.04.05
vPars A.04.05 Monitor
Mixed HP-UX 11i v1/v2 vPars does not refer to mixing hardware (PA and Integrity) platforms.
Additionally, virtual partitions running vPars A.05.xx on HP-UX 11i v3 (11.31), vPars A.04.04
and earlier on HP-UX 11i v2 (11.23), or vPars A.03.04 and earlier on HP-UX 11i v1 (11.11) are not
supported in a mixed HP-UX 11i v1/v2 vPars environment.
Features of Mixed HP-UX 11i v1/v2 vPars Environments
The following are notable features of mixed HP-UX 11i v1/v2 vPars environments:
58 Planning Your System for Virtual Partitions