HP-UX Virtual Partitions Administrator Guide (includes A.05.07) (5900-1229, September 2010)

Figure 3-1 nPars with Resources Aligned as per LORA Guidelines
Virtual Partitions Layout Plan Implementation with LORA Guidelines
The following table shows a virtual partitions layout plan to implement LORA guidelines.
Table 3-9 Virtual Partitions Layout Plan for Implementing LORA Guidelines
keira3keira2keira1Partition Name
num = 6num = 8num = 10Assigned CPUs (A.05.xx)
0
Unassigned CPUs
(A.05.xx)
341034103410Interleaved Memory
23893 MB from cell 216725 MB from cell 1
23894 MB from Cell 0 +
7168 MB from Cell 1Local Memory
2.0.1
2.0.4
1.0.40.0.1I/O LBAs
2/0/4/3/0.6.01/0/4/1/0/4/0.1.0.0.0.0.10/0/1/3/0.6.0.0.6.0Boot Path
2/0/2/1/01/0/4/1/0/4/00/0/1/1/0/4/0LAN
Owned by Keira 1
console port (Integrity
Only)
AutoAutoAutoAutoboot
The virtual partition plan is implemented with the following commands:
vparcreate -p keira1 -a cpu::10 -a mem::3410 -a cell:0:mem::23894 -a cell:1:mem::7168 MB
vparcreate -p keira2 -a cpu::8 -a mem::3410 -a cell:1:mem::16725 MB
vparcreate -p keira3 -a cpu::6 -a mem::3410 -a cell:2:mem::23893 MB
After using the previous commands, you can assign the I/O cards with the following commands:
vparmodify -p keira1 -a io:0/0/1/3/0.6.0.0.6.0:BOOT -a io:0/0/1/3/0.6.0.0.6.0
vparmodify -p keira2 -a io:1/0/4/1/0/4/0.1.0.0.0.0.1:BOOT -a io:2/0/1/1/0/4/0
vparmodify -p keira3 -a io:2/0/4/1/0/4/0.1.0.0.0.0.1:BOOT -a io:2/0/2/1/0
The following figure shows a multi-cell Integrity system after implementing the previous plan.
Planning Your Virtual Partitions for LORA Support 67