HP-UX Virtual Partitions Administrator Guide (includes A.05.07) (5900-1229, September 2010)

azure1 B.11.23 Up
azure2 B.11.11 Up
azure3 B.11.23 Up
azure3# vparstatus -P
Current Virtual Partition Version: A.04.05
Monitor Version: A.04.05
[Virtual Partition OS Version]
Virtual Partition Name OS Version State
============================ ========== =====
azure1 B.11.23 Up
azure2 B.11.11 Up
azure3 B.11.23 Up
17. Verify the correct vPars Monitor has been booted.
If you changed the nPartition’s PRI boot path, you can also verify that the vPars Monitor
has been booted from the correct boot disk:
azure3# vparstatus -m
Console path: No path as console is virtual
Monitor boot disk path: 0.0.6.0.0.5.0
Monitor boot filename: /stand/vpmon
Database filename: /stand/vpdb
...
The boot disk path shown is from a vPars A.04.05 virtual partition.
18. Restart gWLM if needed.
If you disabled (undeployed) gWLM earlier in the update process, you can restart it now.
gWLM is supported with restrictions in mixed HP-UX 11i v1/v2 vPars environments. For
details on these gWLM restrictions, see “Features of Mixed HP-UX 11i v1/v2 vPars
Environments” (page 58).
Following the mixed HP-UX 11i v1/v2 vPars update process, update any applications as needed.
IMPORTANT: If you have installed iCAP version 8.03 during the update process, on each HP-UX
11i v1 virtual partition you must run the command swconfig -v B9073BA to complete the
iCAP installation.
Updating from vPars A.03.xx to Mixed HP-UX 11i v1/v2 vPars (A.03.05 and A.04.05) Environment 97