HP-UX Virtual Partitions Administrator's Guide (includes A.03.05 and A.04.05)

• make_tape_recovery within a vPars-environment, see “Using make_tape_recovery
within a vPars-environment on PA-RISC Servers (vPars A.03.03, A.04.03, A.05.01)” (page 283)
• golden images for recovery, see the white paper Using Golden Images with Virtual Partitions
• peripheral boot devices, see the white paper Booting, Installing, Recovery, and Sharing in a
vPars Environment from DVD/CDROM/TAPE/Network
• Ignite-UX, including make_net_recovery and make_tape_recovery, see the manual
Ignite-UX Administration Guide and the manpages make_tape_recovery(1m) and
make_tape_recovery(1m).
The white papers listed above are available at the following area of the HP Technical
Documentation website:
http://docs.hp.com/en/vse.html#Virtual%20Partitions
Using vparboot -I with Ignite-UX on PA-RISC systems:
When using Ignite-UX version C.06.xx or later, note that the bootable kernel path has changed
• from /opt/ignite/boot/WINSTALL in Ignite-UX B.05.xx and earlier
• to /opt/ignite/boot/Rel_B.11.NN/WINSTALL in Ignite-UX C.06.xx and later
Thus, when using Ignite-UX C.06.xx or later, you must specify the absolute path for the bootable
kernel for the vparboot -Icommand line.
For more information and an example, see “(PA-RISC only) The WINSTALL Boot Kernel Paths
with Different Versions of Ignite-UX and the vparboot -I command” (page 23).
274 Crash Processing and Recovery