HP-UX Virtual Partitions Administrator's Guide (includes A.05.02)

Monitor and Shell Commands
Monitor: Using Monitor Commands
Chapter 5
135
vmunix.backup system.prev vmunix.prev dlkm
vpdb.backup vpmon
• monadmin
controls the vPars flexible administrative capability feature, as described in Chapter 11, “vPars Flexible
Administrative Capability (vPars A.03.03, A.03.04, vPars A.04.02, A.04.03, A.05.01),” on page 329. For
usage information, see “monadmin” on page 333.
• scan
lists all hardware discovered by the Monitor and indicates which virtual partition owns each device.
• settime [ MM DD YYYY hh mm ss ]
sets the system's real time clock. Acceptable date range is 1-1-1970 00:00:00 to 12-31-2034 23:59:59.
• threads
controls the use of hyperthreading on servers with dual core Intel Itanium 2 processors. For usage
information, see “CPU: Hyperthreading ON/OFF (HT ON/OFF)” on page 228.
• time
displays system real time clock and OS time of all the virtual partitions in GMT (Greenwich Mean Time).
The OS time displayed will consider the RTC and clock drift for the virtual partition. However, if the
partition is up, there may be difference in the OS time displayed.
• toddriftreset
resets the drifts of the real-time clock. Use this command if you reset the real-time clock of the hard
partition at the BCH prompt. For brief information, see “Real-time clock (RTC)” on page 25.
• vparinfo [partition_name]
This command is for HP internal use only.